Labculture® Class II (Low Noise) Biosafety Cabinet

Optimum combination of Safety, Performance and Ergonomics

Esco Labculture® Class II Type A2 Biological Safety Cabinet combines Esco's experience of more than 20 years in biosafety cabinet technology. The Labculture® combines a multitude of design, construction and proprietary technological considerations to bestow optimum operator, product and environmental protection. Utilizing 2 minipleat ULPA (Ultra Low Air Penetration) filters which operate at a typical efficiency of 99.999%, these surpass the conventional HEPA (High Efficiency Particulate Air) filters in contamination protection.

Esco Labculture® features a 10-degree sloped front for maximum operator comfort. A 1-piece stainless steel work zone and the absence of screws or connectors in the work zone facilitate ease of cleaning after experiments. The Isocide™ powder coating finish prevents microbial/bacterial growth on the exterior and delivers a sleek, elegant appearance fitting for the leader in biosafety cabinet technology.

Product Highlights

• Ultra-low noise level of <53.5 dBA according to EN12469 amd <58.5 dBA according to NSF49. (Ultra low noise level achieved on 1.2 meter (4') model.
• Unique Esco Dynamic Chamber™ plenum.
• Negative pressure plenum surrounds contaminated positive pressure plenum; no fabric bags are used.
• Dual, long-life ULPA filters for supply and exhaust (per IEST-RP-CC001.3) with 99.999% efficiency for particle size between 0.1 to 0.3 microns.
• Angled supply filter matches cabinet profile to achieve best downflow uniformity.
• Esco Sentinel™ microprocessor.
• Frameless, shatterproof sash is easier to clean.
• Ergonomically angled front improves reach and comfort.
• Actual work access height is 45 mm (1.8") higher than tested sash opening.
• Removable one-piece work surface simplifies cleaning.
• Raised airflow grille maintains safety by preventing blockage.
• Optional UV lamp is located behind control panel away from line of sight. (Does not apply to 1.8 m / 6' models.)
• Esco antimicrobial coating on all painted surfaces minimizes contamination.
• Enhanced side-capture zones optimize containment.
• Work area on Esco 0.9 meter (3') cabinet is equivalent to work area offered on larger 1.2 meter (4') conventional cabinet.
  

Optional Accessories

• Support stand with leveling feet or castor wheels.
• Hydraulic support stand with motorized height adjustment capabilities.
• Exhaust Collar for thimble ducting.
• Germicidal UV lamp for sterilization of cabinet interior.
• Microscope Mount Pouch: includes viewing pouch, lay-in window, and microscope support.
• Ergonomic Labchair.
• PVC arm rest.
• Ergonomic footrest.
• Electrical socket outlets.
• Service fixtures.
• IV bar with hooks.
• Microscope mounting pouch
• RS232 port with data output
  
  
  

Airflow Diagram

Ambient air is pulled through the perforations located towards the work zone front to prevent contamination of the work surface and work product. The inflow does not mix with the clean air within the cabinet work zone. Inflow air travels through a return path toward the common air plenum (blower plenum) at the top of the cabinet. Approximately 35% of the air in the common plenum is exhausted through the ULPA filter to the room. The remaining 65% of the air is passed through the downflow ULPA filter and into the work area as a vertical laminar flow air stream bathing the work surface in clean air.

The uniform, non-turbulent air stream protects against cross contamination within and throughout the work area. Near the work surface, the downflow air stream splits with a portion moving toward the front air grille, and the remainder moving to the rear air grille. A small portion of the ULPA filtered downflow enters the intake perforations at the side capture zones at a higher velocity (small blue arrows). A combination of inflow and downflow air streams forms an air barrier that prevents contaminated room air from entering the work zone, and prevents work surface emissions from escaping the work zone. Air returns to the common air plenum where the 35% exhaust and 65% recirculation process is continued.

Product Related Links

Specifications | Video | Catalogue

Certificates

EN12469 | JIS K3800:2000 | NSF 49