Containment Barrier Isolator

Your Practical Solution to cGMP Compliance

Containment Barrier Isolator (CBI) facilitates the isolation of a product or process while providing the required conditions for a sterile/ aseptic and hazardous environment. This full stainless-steel isolator provides a comprehensive range of personnel and product protection in addition to protection for the surrounding work areas and the environment.

Standard Features of CBI

  • Full stainless-steel isolator with SS 304 exterior and fully welded SS 316L internal chambers with rounded coved corners

  • Pressure-tested Class 2 as per ISO 10648-2 standards

  • Esco HMI controller supervises all functions and monitors airflow and pressures in real-time

  • Safe change glove system allows the changing of gloves while maintaining aseptic conditions inside the chambers

MODELS

Guide to Models

CBI-___-___-___-___-__

Isolator Unit Model Internal Width No. of Gloves Ports Voltage Code Pressure Airflow NUMBER of PTC Type of PTC Sharps Bin inside
Containment Barrier Isolator CBI Unidirectional U 1200mm 2G 220-240 VAC, 50/60 Hz 8 Negative N Recirculating R 1 Left L PTC0 to PTC7 (see PTC legend) with sharps container provision S
Turbulent Static Seal T-SS 1600mm 3G 1 Right R
Turbulent Inflatable Seal T-IS
Class III BSC 3 1200mm 4G 110-120 VAC, 50/60 Hz 9 Positive P Single Pass/Total Exhaust S Both Left and Right B without sharps container provision 0
Hybrid (Convertible Class III to Class I) H No PTC 0