-
Products
CelMate® CO₂ Incubators
VivoCell™ Precise Temperature, CO₂ Control and High Humidity
- Best uniformity and control among competition
- Fast CO₂, temperature and humidity recovery without overshoot
- Direct heat design for rapid recovery, with 8 heater grouped into 3 zones
- Air jacket provides isolation against ambient temperature fluctuations
- VentiFlow™ forced convection accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination
- Filtered air circulates across water pan to accelerate humidifying process
- Air flows gently around culture plates, causing no disturbance to cell culture
- Blower automatically stops when door is opened, to minimize mixing of chamber and room air
Contamination Control System Provides Seamless Protection
- SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 condition.
- SwiftCon™ 90˚C validated moist heat decontamination cycle operates overnight to eradicate any contamination in the unlikely event it occurs. (decontamination cycle time is 20 hours).
- All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
- The incubator’s main body is made from electro-galvanized steel with Esco’s unique ISOCIDE™ antimicrobial coating.
- The interior of the chamber is made from stainless steel type 304.
User-Friendly Software Interface
- Comprehensive user-configurable alarms for all the parameters.
- CelAlert™ alarm system reminds user to replace CO₂ tank and ULPA filter.
- Intelligent data and event logger records all incubator parameters for on screen recall.
- 2 MB built-in flash memory guarantees long term storage of data.
- Diagnostic interface and on line quick help provide comprehensive solutions to frequently encountered problems.
- RS485 data output
Easy-to-Clean
- Chamber is made of shiny stainless steel chamber with all rounded corners.
- Ductwork, plenums and shelves are removable without tools.
- Glass door is removable without tools.
- Inner gasket removable without tools.
Easy-to-Service
- Diagnostic functions in the microprocessor include historical read-out of the parameters.
- Service can be carried out from the top/front
- Esco electronics and sensors have been expertly designed and paired to be inherently drift-free, to minimize need for calibration
Models Description CLM-170B-8 CelMate® Incubator 170 L, IR Sensor, CO₂ Control, ULPA, Moist Decon, 230 VAC, 50/60 Hz (Without Decon Pump) CLM-240B-8 CelMate® Incubator 240 L, IR Sensor, CO₂ Control, ULPA, Moist Decon, 230 VAC, 50/60 Hz (Without Decon Pump) CLM-170B-9 CelMate® Incubator 170 L, IR Sensor, CO₂ Control, ULPA, Moist Decon, 115 VAC, 50/60 Hz (Without Decon Pump) CLM-240B-9 CelMate® Incubator 240 L, IR Sensor, CO₂ Control, ULPA, Moist Decon, 115 VAC, 50/60 Hz (Without Decon Pump) Options
- COA-1001 : Humidity Display, Factory Installed
- COA-1001-F : Humidity Display, Field-Installed Kit
- COA-1002 : CO₂ Backup (Tank Switcher), Factory Installed
- COA-1002-F : CO₂ Backup (Tank Switcher), Field Installed
- COA-1004 : Reversed Door Swing, Factory Installed
- COA-1005 : Analog Outputs, Factory Installed
- COA-1005-F : Analog Outputs, Field Installed
- COA-1006 : Sealed Inner Door Kit for 170L (4 Glass Doors With Latches), Factory Installed
- COA-1006-F : Sealed Inner Door Kit (4 Glass Doors With Latches), Field Installed
- COA-1007 : N₂ Backup (Tank Switcher), Factory Installed
- COA-1007-F : N₂ Backup (Tank Switcher), Factory Installed
Accessories
- COA-2001-F : Roller Base (170 L)
- COA-2019-F : Roller Base (240 L)
- COA-2002-F : Floor Stand 200mm (8.0") With Adjustable Feet (170 L)
- COA-2021-F : Floor Stand 200mm (8.0") With Adjustable Feet (240 L)
- COA-2003-F : Floor Stand 700mm (27.6") With Casters (170 L)
- COA-2023-F : Floor Stand 700mm (27.6") With Casters (240 L)
- COA-2004 : CCL-170 2-Units Floor Stand
- COA-2005-F : 2-Stage Gas Regulator for CO2/N2
Choose One of The Connectors Below:
1080588 - CGA 320 Connector (US Standard)
1080589 - BP-BS34-#8-NT4 Connector (British Standard)
1080590 - G5/8-RH Connector (China Standard) - COA-2024-F : Extra Shelf (50 L, Stainless Steel)
- COA-2007-F : Extra Shelf (170 L, Stainless Steel)
- COA-2025-F : Extra Shelf (240 L, Stainless Steel)
- OA-2008-F : Stacking Kit (One Set Included With Every Unit Purchased)
- COA-2010-F : Electronic CO₂ Analyzer, For CO₂/O₂ Temp Measurement
(With Temp. Probe) - COA-2016-F : Electronic CO₂ + O₂ Analyzer, For CO₂/O₂ Temp Measurement
(With Temp. Probe) - COA-2017-F : Electronic CO₂ + O₂ + RH Analyzer, For CO₂/O₂/RH/Temp Measurement
(With Temp. Probe) - COA-2011-F : IQ/OQ Documentation
- COA-2012-F : 6" Chart Recorder, Temp, 115/230 VAC 50/60 Hz
- COA-2013-F : 8" Chart Recorder, Temp/Temp, 115/230 VAC 50/60 Hz
- COA-2014-F : 6" Chart Recorder, Temp/RH, 115/230 VAC 50/60 Hz
- COA-2015-F : Inner Door Shelving Kit
(4 Sets With Total 12 Mini Shelves For One Incubator) - 5250001 : Voyager® Software Kit
VivoCell™ Precise Temperature, CO₂ Control and High Humidity
- Best uniformity and control among competition
- Fast CO₂, temperature and humidity recovery without overshoot
- Direct heat design for rapid recovery, with 8 heater grouped into 3 zones
- Air jacket provides isolation against ambient temperature fluctuations
- VentiFlow™ forced convection accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination
- Filtered air circulates across water pan to accelerate humidifying process
- Air flows gently around culture plates, causing no disturbance to cell culture
- Blower automatically stops when door is opened, to minimize mixing of chamber and room air
Contamination Control System Provides Seamless Protection
- SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 condition.
- SwiftCon™ 90˚C validated moist heat decontamination cycle operates overnight to eradicate any contamination in the unlikely event it occurs. (decontamination cycle time is 20 hours).
- All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
- The incubator’s main body is made from electro-galvanized steel with Esco’s unique ISOCIDE™ antimicrobial coating.
- The interior of the chamber is made from stainless steel type 304.
User-Friendly Software Interface
- Comprehensive user-configurable alarms for all the parameters.
- CelAlert™ alarm system reminds user to replace CO₂ tank and ULPA filter.
- Intelligent data and event logger records all incubator parameters for on screen recall.
- 2 MB built-in flash memory guarantees long term storage of data.
- Diagnostic interface and on line quick help provide comprehensive solutions to frequently encountered problems.
- RS485 data output
Easy-to-Clean
- Chamber is made of shiny stainless steel chamber with all rounded corners.
- Ductwork, plenums and shelves are removable without tools.
- Glass door is removable without tools.
- Inner gasket removable without tools.
Easy-to-Service
- Diagnostic functions in the microprocessor include historical read-out of the parameters.
- Service can be carried out from the top/front
- Esco electronics and sensors have been expertly designed and paired to be inherently drift-free, to minimize need for calibration
Models Description CLM-170B-8 CelMate® Incubator 170 L, IR Sensor, CO₂ Control, ULPA, Moist Decon, 230 VAC, 50/60 Hz (Without Decon Pump) CLM-240B-8 CelMate® Incubator 240 L, IR Sensor, CO₂ Control, ULPA, Moist Decon, 230 VAC, 50/60 Hz (Without Decon Pump) CLM-170B-9 CelMate® Incubator 170 L, IR Sensor, CO₂ Control, ULPA, Moist Decon, 115 VAC, 50/60 Hz (Without Decon Pump) CLM-240B-9 CelMate® Incubator 240 L, IR Sensor, CO₂ Control, ULPA, Moist Decon, 115 VAC, 50/60 Hz (Without Decon Pump) Options
- COA-1001 : Humidity Display, Factory Installed
- COA-1001-F : Humidity Display, Field-Installed Kit
- COA-1002 : CO₂ Backup (Tank Switcher), Factory Installed
- COA-1002-F : CO₂ Backup (Tank Switcher), Field Installed
- COA-1004 : Reversed Door Swing, Factory Installed
- COA-1005 : Analog Outputs, Factory Installed
- COA-1005-F : Analog Outputs, Field Installed
- COA-1006 : Sealed Inner Door Kit for 170L (4 Glass Doors With Latches), Factory Installed
- COA-1006-F : Sealed Inner Door Kit (4 Glass Doors With Latches), Field Installed
- COA-1007 : N₂ Backup (Tank Switcher), Factory Installed
- COA-1007-F : N₂ Backup (Tank Switcher), Factory Installed
Accessories
- COA-2001-F : Roller Base (170 L)
- COA-2019-F : Roller Base (240 L)
- COA-2002-F : Floor Stand 200mm (8.0") With Adjustable Feet (170 L)
- COA-2021-F : Floor Stand 200mm (8.0") With Adjustable Feet (240 L)
- COA-2003-F : Floor Stand 700mm (27.6") With Casters (170 L)
- COA-2023-F : Floor Stand 700mm (27.6") With Casters (240 L)
- COA-2004 : CCL-170 2-Units Floor Stand
- COA-2005-F : 2-Stage Gas Regulator for CO2/N2
Choose One of The Connectors Below:
1080588 - CGA 320 Connector (US Standard)
1080589 - BP-BS34-#8-NT4 Connector (British Standard)
1080590 - G5/8-RH Connector (China Standard) - COA-2024-F : Extra Shelf (50 L, Stainless Steel)
- COA-2007-F : Extra Shelf (170 L, Stainless Steel)
- COA-2025-F : Extra Shelf (240 L, Stainless Steel)
- OA-2008-F : Stacking Kit (One Set Included With Every Unit Purchased)
- COA-2010-F : Electronic CO₂ Analyzer, For CO₂/O₂ Temp Measurement
(With Temp. Probe) - COA-2016-F : Electronic CO₂ + O₂ Analyzer, For CO₂/O₂ Temp Measurement
(With Temp. Probe) - COA-2017-F : Electronic CO₂ + O₂ + RH Analyzer, For CO₂/O₂/RH/Temp Measurement
(With Temp. Probe) - COA-2011-F : IQ/OQ Documentation
- COA-2012-F : 6" Chart Recorder, Temp, 115/230 VAC 50/60 Hz
- COA-2013-F : 8" Chart Recorder, Temp/Temp, 115/230 VAC 50/60 Hz
- COA-2014-F : 6" Chart Recorder, Temp/RH, 115/230 VAC 50/60 Hz
- COA-2015-F : Inner Door Shelving Kit
(4 Sets With Total 12 Mini Shelves For One Incubator) - 5250001 : Voyager® Software Kit
Contact Us
Esco Micro Pte. Ltd.
21 Changi South Street 1 Singapore 486777
+65 65420833 | +65 65426920
Download Apps
Global Site
Italy
Singapore
Australia
Japan
South Africa
China
Korea
Spain
Europe
Malaysia
Taiwan
France
North America
Thailand
Germany
Pakistan
UK
Hong Kong
Philippines
Vietnam
Esco Medical
Indonesia
Esco Pharma
Russia