Streamline® Compounding Aseptic Containment Isolator (Total Exhaust)

Streamline® Compounding Aseptic Containment Isolator (Total Exhaust)
  • H14 filters with a typical efficiency of >99.995% at 0.3 microns provide superior ISO Class 5 air cleanliness.
  • Sentinel Gold™ Microprocessor controller supervises all functions and monitors airflow and pressures in real-time.
  • Work zone and pass-thru interchange are under negative pressure to the room in order to maintain operator protection in case of a breach in the barrier isolation system.
  • Robust construction and enhanced safety features qualify Streamline® Compounding Aseptic Containment Isolator (Total Exhaust) for the most demanding laboratory applications. The isolator is fully assembled and ready to install and operate when shipped.
  • Bag-In Bag-Out Exhaust Filter at the top allows for safe and convenient filter change.
  • Ergonomically angled front and oval glove ports improve reach and comfort.
  • Safe-change cuff rings permit glove changes with zero risk of contaminating the work zone or pharmacy environment.
  • One-piece work zone liner with no crevices is easy to clean.
  • Esco Isocide™ antimicrobial coating on all painted surfaces minimizes contamination.
  • Sharps disposal system and hydraulic height-adjustable stand are available as options.

Guide to Models

SCI-__ __ - N S __ - __ __

Isolator

Code

Internal Width

No. of Gloveports

Electrical Code

Code

Pass-through Chamber

Code

Exhaust Type

Code

Sharps Container*

Code

Streamline Compounding Isolator

SCI

910 mm

2G

220-240 V, AC, 50/60 Hz, 1Ø

8

Left

L

Double Exhaust (Top & Bottom)

1

Yes

0

1220 mm

3G

110-120 V, AC, 50/60 Hz, 1Ø

9

Right

R

Single Exhaust (Top)

2

No

S

 

 

 

 

 

 

Single Exhaust (Bottom)

3

 

 

Note: *Sharps container option is not available for Double Exhaust Filter Type

 

Streamline® Compounding Aseptic Containment Isolators (Total Exhaust) are available as a standard bench top unit. Additional accessories are available for further enhancement.

Electrical Outlets and Utility Fittings

  • Electrical outlet, ground fault, North America
  • Electrical outlet, Euro/Worldwide

Support Stands

  • Fixed height, available 711 mm (28") or 864 mm (34") - With leveling feet, ±38.1 mm (1.5") (SAL) - With casters (SPC)
  • Telescoping height stand for leveling feet (STL), nominal range 660 mm to 960 mm (26"to 37.8")
  • Telescoping height stand for casters (STC), nominal range 660 mm to 880 mm (26" to 34.6") - Adjustable in 25.4 mm (1") increments
  • Infinitely adjustable hydraulic stand with casters elevates to accommodate a sitting or a standing user's work surface height (SHM)

Other Options and Accessories

  • IV bar, with hooks
  • All stainless steel construction
  • Sharps disposal system
  • Cleaning accessories
  • Alarm package
  • Exhaust Collar
  • Hard Ducting with Anti-blow back valve